Marani

DPA260P

DPA260P is a cost-effective 2-IN/6-OUT digital speaker management system. Designed to be catered for any crossover configuration, it provides the suitable

processing and control for live application use. It offers 2 analog inputs, and 6 analog outputs, managed by a powerful MARANI M704 DSP Engine, in addition to 24 Bit AD/DA Converters. Each input channel provides a choice of

EQ with a 11-band Parametric Filters, gain control, Dynamic Low boost, noise gate function, RMS compressor, internal White/Pink Noise Generator, and configurable delay. Each output offers up to 7-band of parametric equalization in to the crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features peak limiter or RMS Compressor selectable, Dynamic Loudness filter (only Output 1,3,5) and driver alignment delay. The DPA260P supports a full matrix mixing mode where inputs may be routed/mixed in any ratio to any output. For remote configuration and control the DPA260P can be connected via USB or RS485 connections. The control

remote PC software allows simultaneous control up to 32 units, setting all parameters and showing real time levels.

Outstanding Performance Excellent sonic performance with 24bit high end converters coupled with 48kHz sample rate 2 inputs, 6 outputs with full matrix mixing
Top-grade DSP Engine 11 band parametric equalization per input channel 7 band parametric equalization per output channel. Each band can be switched to Bell, Shelving Crossover filters with slopes from 6dB/Octave up to 48dB/Octave including Butterworth, Bessel, Linkwitz-Riley. Each output features a dynamic range controller composed of a Peak Limiter/Rms Compressor Adjustable Delay time up to 900 ms for every input channel up to 340ms for every output channel Phase correction per Input/output channel
Direct PC/Network Connection Rear panel USB connector for direct PC communications RS485 connection for system setup, monitoring and control via fully manageable remote PC software
Control Front panel interactive LCD display for local access and configuration Front panel 7-LED level meter indicators per channel Simultaneous control up to 32 units via PC software Up to 48 storable user presets Security Lockout
* Auditoriums * Convention Centers * Houses of Worship * Stadiums and Arenas * Theaters * Touring Musicians * Performing Art Centers * Stage Monitoring System digital
Analog Input 2 x XLR electronically balanced
Analog Output 6 x XLR electronically balanced
Minimun Load 150 ohm
THD+N 0.001% at 1kHz 0dBu
S/N >106dBA
Frequency Response 20Hz - 20kHz; -0.5dBu at 20Hz and 20kHz
AD & DA Converters Cs42528 24bit - 48kHz
DSP Engine MARANI M704
DSP Resolution 24bit (data) x 24 bit (coeff.), 54 bit accumulation registers 96 bit precision on intermediate processing data
Parametric Equalization 11 filters per input 7 filters per output
Filter Type Bell, Shelving
Filter Gain From -12dBu up to +12dBu by 0.5dBu resolution steps
Center Frequency from 20Hz up to 20kHz with 1Hz resolution steps
Filter Q/BW Q from 0.4 up to 128
Input gain From -18dB to +12dB by 0.1dBu resolution steps;
Output gain From -18dB to +18dB by 0.1dBu resolution steps
Crossover Section HPF/LPF Butterworth 6/12/18/24/36/48 dB per octave Bessel 12/24 dB per octave Linkwitz-Riley 12/24/36/48 dB per octave
Internal Noise Generator White/ Pink Noise; Level from -30dBu to 0dBu
Input Noise Gate Threshold from -90dBu up to -60dBu Attack time from 1ms up to 1000ms;Release time from 10ms up to 1000ms
Input RMS Compressor Threshold from -14dBu up to +16dBu and Byp Ration 2:1~100:1; Knee: 0% ~ 100% Attack time from 5ms up to 200ms;Release time from 0.1 sec up to 3 sec
Output RMS Compressor (if selected) Threshold from -14dBu up to +16dBu and Byp Ration 2:1~100:1; Knee: 0% ~ 100% Attack time from 5ms up to 200ms;Release time from 0.1 sec up to 3 sec
Output Peak Limiter (if selected) Threshold from -14dBu up to +16dBu and Byp Attack time from 5ms up to 200ms;Release time from 0.1 sec up to 3 sec
DLF Input: Boost Filter from 0% to 100%;Frequency from 20Hz to 20kHz; Output(Only for output 1,3,5): Attenuation Filter from 0dBu to -6dBu;Frequency from 20Hz to 1kHz Q from 1 to 9.9 step 0.1
Delay 900 ms 10.4us increment/decrement steps per input channel 340 ms 10.4us increment/decrement steps per output channel
Ground Noise -90dBu
Device Presets 48 User Presets
Front Panel 2x24 character LCD display with green LED backlight 7-LED meter per input channel -20dBu to +15dBu, clip 7-LED meter per output channel -15dBu to +15dBu, clip and limiter mode Blue LED (Edit) per channel Red LED (Mute) per channel NAV/PM1 Rotary encoder push button switch PM2, PM3, ENTER, ESC, UTILITY push button switches EDIT/MUTE push button per channel USB type B connector
Rear Panel 2 x XLR female connector (Input) 6 x XLR male connector (Output) 1 x XLR female connector for RS485 (Input) 1 x XLR male connector for RS485 (Output) 2 x Ground-lift toggle switch IEC C13 16A connector; Power on/off switch
Main AC 90-240VAC (50/60Hz) – 40W
Dimensions 19”x 1.75”x 9” (483x44x229mm) 1RU
Weight, Net / Shipping 7.71 lbs (3.5 Kg) / 8.82 lb (4 Kg)

Explore More in Signal Processing

Browse products across all Signal Processing categories

DPA260P
Marani

DPA260P

DPA260P is a cost-effective 2-IN/6-OUT digital speaker management system. Designed to be catered for any crossover configuration, it provides the suitable processing and control for live application use. It offers 2 analog inputs, and 6 analog outputs, managed by a powerful MARANI M704 DSP Engine, in addition to 24 Bit AD/DA Converters. Each input channel provides a choice of EQ with a 11-band Parametric Filters, gain control, Dynamic Low boost, noise gate function, RMS compressor, internal White/Pink Noise Generator, and configurable delay. Each output offers up to 7-band of parametric equalization in to the crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features peak limiter or RMS Compressor selectable, Dynamic Loudness filter (only Output 1,3,5) and driver alignment delay. The DPA260P supports a full matrix mixing mode where inputs may be routed/mixed in any ratio to any output. For remote configuration and control the DPA260P can be connected via USB or RS485 connections. The control remote PC software allows simultaneous control up to 32 units, setting all parameters and showing real time levels.

DPA260RTA
Marani

DPA260RTA

DPA260P is a cost-effective 2-IN/6-OUT digital speaker management system. Designed to be catered for any crossover configuration, it provides the suitable processing and control for live application use. It offers 2 analog inputs, and 6 analog outputs, managed by a powerful MARANI® DSP Engine, in addition to 24 Bit AD/DA Converters. Each input channel provides a choice of EQ with a 31-band Parametric EQ, gain control, noise gate function, RMS Compressor, Internal White/Pink Noise Generator and configurable delay. Each output offers up to 7-band of parametric equalization into the crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features peak limiter and driver alignment delay. The DPA260P supports a full matrix mixing mode where inputs may be routed/mixed in any ratio to any output. For remote configuration and control the DPA260P can be connected via USB or RS485 connections. The control remote PC software allows simultaneous control up to 32 units, setting all parameters and showing real time levels. DPA260RTA is a special version that supports RTA functionality and digital input. DPA260P+ & DPA260RTA+ is an upgraded advanced version

DPA480P
Marani

DPA480P

DPA480P is a cost-effective 4-IN/8-OUT digital speaker management system. Designed to be catered for any crossover configuration, it provides the suitable processing and control necessary for both live and fixed installation use. It offers 4 analog inputs, 8 analog outputs, managed by a powerful MARANI® DSP Engine, in addition to high performance 24 bit AD/DA Converters.Each input channel provides a choice of EQ with 30-band Parametric EQ, Gain control, Noise Gate Function, RMS Compressor and configurable Delay. Each output offers up to 7-band of parametric equalization, in addition to the crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features Peak Limiter, HP/LP Filters and driver alignment Delay. The DPA480P supports a full matrix mixing mode where inputs may be routed/mixed in any ratio to any output. For remote configuration and control the DPA480P can be connected via USB or RS485 connections. The control remote PC software allows simultaneous control up to 32 units, setting all parameters and showing real time levels.

EQ-215 Graphic Equalizer
DynaTech

EQ-215 Graphic Equalizer

EQ-215 Graphic Equalizer

MIR480A
Marani

MIR480A

MIR480A is a digital audio processor newly designed by Marani. It has extremely low noise floor, high dynamic range and powerful internal DSP to cover most of the usage scenarios. Whether in meeting rooms , theaters , touring performances, or even large-scale tours, you can use the A series processors. Advanced circuit design and original DSP algorithm are the core of pure and high-quality sound. In the signal processing part of MIR480A, inside powerful MARANI DSP, DSP and AD/DA converters are running at 96KHz sampling rate, complete processing functions provide a complete speaker crossover solution. From input gain/delay/noise gate/EQ/compression/FIR ,tooutputgain/delay/polarity/frequency division/FIR/EQ/compression/compression, there are up to 16 types of parametric equalizer (PEQ) The filter type can be selected. The output crossover filter has the classic Linkwitz-Riley /Bessel/Butterworth, and there are also NXF horntype filters and FIR filters with a slope of up to 120dB per octave. The newly added MIR linear phase frequency divider filter can make the phase of the crossover point easier to join and produce a lower delay. Everything we provide is for better sound. Added DSP plug-in, providing 96kHz FIR filter/highorder signal generator/RTA real-time spectrum analyzer, etc. The newly designed Hard Limiter (Hard Limiter) allows a constant rate limit on signals exceeding the threshold at any threshold to better protect the speaker unit. Each input and output channel provides a maximum 512-tap FIR filter, which can be customized by third-partysoftwaretogeneratetheFIR convolution you need. It can be used for speaker presets to improve the phase response and control the directivity according to requirements. The newly added MIR linear phase divider filter has the filter shape of the traditional IIR filter (Linkwitz-Riley 24+48/oct), but does not produce any phase shift, and the resulting delay is about 50% of the FIR filter.

MiR480I
Marani

MiR480I

The MIR-F/I Series is the pinnacle of professional audio processing technology. Designed for professional Sound and System Engineers, these processors feature advanced capabilities such as Dynamic EQ (DEQ) and Auto EQ (AEQ). With up to 27 bands of parametric equalizers, the MIR-F/I Series allows extensive customization to meet the unique needs of any audio environment. The 8 channels Dynamic EQ processing module incorporates a sophisticated 5-band dynamic equalization system, featuring High/Low Shelving filters and three parametric filters. The DEQ supports four operational modes: Boost/Cut Above/Below Threshold, covering the entire audible spectrum from 20 Hz to 20 kHz. Each parametric filter offers three Q-factor modes for precise adjustments. MARANI’s Auto EQ simplifies system calibration with a proprietary algorithm that allows for one-touch measurement of impulse response. This innovative feature generates precise FIR coefficients and PEQ parameters automatically, enhancing efficiency in achieving optimal sound quality. Additionally, the inclusion of Dante protocol ensures seamless connectivity for modern audio networks. Elevate your audio performance with the MIR-F/I Series, where cutting-edge technology meets Italian engineering, transforming your listening experience with precision and unparalleled sonic intelligence.

MIR880F
Marani

MIR880F

The Mir-F family of digital processors are Marani's new flagship system processors, including the MIR480I and MIR880F.The hardware adopts top AD/DA chips with excellent -96dBu background noise. It also has analog, digital AES/EBU, and Dante signal access capabilities, and has automatic switching function. Any signal can be set as the highest priority. As the core processor of the system, it has the redundancy and backup characteristics, and is suitable for government projects, high-end clubs, large mobile performances, theaters, radio and television and other places with higher requirements for signal processing. From the input gain/delay/noise gate /EQ/ compression /FIR to the output gain/delay/polarity /crossover/FIR/EQ/ compression/peak limiter, the parametric equalizer (PEQ) has up to 16 filter types to choose from. The output crossover filter has the classic Linkwitz-Riley/Bessel/Butterworth, The NXF(Notched X-over Filter) and FIR filter with slope up to 120dB per octave are also available. The new MIR linear phase crossover filter makes it easier to engage the phase of the crossover point and produces lower latency. Everything we offer is for better sound. With the addition of DSP plug-in, traditional processor architecture is usually fixed and unadjustable. Marani innovatively introduces the concept of plug-in, and uses powerful co-processor to complete dynamic processing that traditional processor is difficult to complete, such as dynamic balancing, linear phase multi-segment compression, feedback suppression and other functions. This feature is an open architecture, and the type and number of plug-ins will be updated from time to time. The new design of Hard Limiter allows constant rate limiting of signals exceeding the threshold at any threshold, better protecting the speaker unit. Each input/output channel provides a filter with a maximum of 512 tap FIR. You can use the built-in AutoEQ plus an external ASIO sound card to measure pulse and generate FIR coefficient or use third-party software to generate FIR coefficient as you need. For speaker preset, phase response can be improved and directivity can be controlled as required. The new MIR linear phase crossover has the type and shape of the traditional IIR filter, but does not produce any phase distortion, and the delay generated is about 50% of the FIR filter.

MiR360E
Marani

MiR360E

3-in/6-out MIR professional audio processor

Trusted Brands. Proven Performance.

We partner with world class manufacturers to bring you innovative and reliable audio solutions

DynaTech
JTS
Marani
P.Audio
UNiKA
DynaTech
JTS
Marani
P.Audio
UNiKA

Why Professionals
Choose Sonotone

For over four decades, we have been the trusted partner for audio professionals across India

48+ Years Experience

Decades of expertise in delivering professional audio solutions.

Authorized Global Brands

Official distributor for leading international audio brands.

Pan-India Network

Strong distribution and service network across 21+ states.

Expert Technical Support

Skilled and certified team to help you at every step.

End-to-End Solutions

From consultation to installation and after-sales support.

Trusted by Professionals

Preferred by cinemas, rental companies, DJs & Installers.

Sonotone

We’re Here to Help You

Quick access to the support and resources you need.

Find Authorized Dealers

Locate trusted distributors and dealers across india to buy genuine products

Find Dealers

Service & Repairs

Get professional assistance, repairs and maintenance from our service centers

Find Service Centre

Product Verification

Verify your product authenticity and check warranty status easily

Verify Product
Store WhatsApp