Products Catalog
Showing 225 products
DynaTech
PSC24 Electronic Crossover
Features: Stereo 3-way & sub woofer crossover Low/mid Crossover point between 200 Hz to 700 Hz Mid/High Crossover point between 1.5 kHz to 8 kHz Sub woofer frequency range between 20 Hz and 200 Hz Individual Controls for Subwoofer, Low, Mid, High frequency Input / Output jack use XLR connector Frequency response from 20~20 kHz +/-1db AC 120V/240V switchable 1U rack spaceApplications:Rental Companies | Install Audio | Theatre
DynaTech
SD-18EL Bass Speakers
Dynatech Systems has always been dedicated in meeting the needs of sound reinforcement professionals with some of the best products available. Dynaytech"s SD-18EL are one of the Best Bass Speakers appropriate for applications as diverse as scoop bins, conventional reflex cabinets and horn loaded systems The SD Series Bass loudspeakers deliver extraordinary performance where high speech intelligibility and natural sounding music is required at unmatched value. Dynatech SD-18EL (Best Bass Speaker) is a very high output low frequency transducer. The 18 inch (460mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub-woofer response in both live sound and recorded music venues. The operating range is 30Hz to 200Hz. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SD-18EL employs a large 5 inch (127mm) diameter voice coil that provides an AES rated 1800 watts of continuous power handling and a full 6800 watts of peak rated power handling when sufficient amplifier headroom is available. It is recommended that the transducer be loaded into a properly designed vented enclosure and suitable active high pass filtering be employed if extremely high power levels are expected at low frequencies. The SD-18EL utilizes Dynatech's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is an inside/outside geometry with Dynatech's square wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design insures very high displacement and linear response while maintaining excellent control. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity. All the above integrated features makes SD-18EL one of the best bass loudspeakers available in Dynatech"s loudspeaker range. SMALL SIGNAL PARAMETERS Re 5.22Ω Fs 33.15 Hz Mms 215.24 g Qms 15.42 Qes 0.24 Qts 0.24 Vas 2.3.84 lt SD 1164.16 cm2 BI 30.99 Tm Cms 107 μm/N Le (at 1kHz) 1.33 mH The SD-18EL is an very high output low frequency transducer. The 18 inch (460mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating range is 30Hz to 200Hz. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SD-18EL employs a large 5 inch (127mm) diameter voice coil that provides an AES rated 1800 watts of continuous power handling and a full 6800 watts of peak rated power handling when sufficient amplifier headroom is available. It is recommended that the transducer be loaded into a properly designed vented enclosure and suitable active high pass filtering be employed if extremely high power levels are expected at low frequencies. The SD-18EL utilizes Dynatech's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is an inside/outside geometry with Dynatech's square wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design insures very high displacement and linear response while maintaining excellent control. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
DynaTech
Dynatech SD-21EL
The SD-21EL is an ultra high output low frequency transducer. The 21 inch (533mm) diameter piston will produce extremely high sound pressure evels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The combination of a large radiating area and high linear displacement will generate substantial acoustic power. The operating range is 20Hz to 200Hz. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SD-21EL employs an extremely large 6 inch (152mm) diameter voice coil that provides an AES rated 2000 watts of continuous power handling and a full 8000 watts of peak rated power handling when sufficient amplifier headroom is available. It is recommended that the transducer be loaded into a properly designed vented enclosure. The SD-21EL utilizes Dynatech's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is an "inside/outside" geometry with Dynatech's square wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design insures very high displacement and linear response while maintaining excellent control. For additional mechanical power handling it is recommended that a high order high pass filter be used and tuned immediately below the enclosure tuning frequency. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity. SMALL SIGNAL PARAMETERS Re 5.8Ω Fs 32.8 Hz Mms 315.02 g Qms 9.526 Qes 0.378 Qts 0.364 Vas 292.92 lt BI 31.55 Tm Le (at 1kHz) 0.81 mH The SD-21EL is an ultra high output low frequency transducer. The 21 inch (533mm) diameter piston will produce extremely high sound pressure evels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The combination of a large radiating area and high linear displacement will generate substantial acoustic power. The operating range is 20Hz to 200Hz. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SD-21EL employs an extremely large 6 inch (152mm) diameter voice coil that provides an AES rated 2000 watts of continuous power handling and a full 8000 watts of peak rated power handling when sufficient amplifier headroom is available. It is recommended that the transducer be loaded into a properly designed vented enclosure. The SD-21EL utilizes Dynatech"s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is an "inside/outside" geometry with Dynatech's square wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design insures very high displacement and linear response while maintaining excellent control. For additional mechanical power handling it is recommended that a high order high pass filter be used and tuned immediately below the enclosure tuning frequency. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
DynaTech
Sub-15D Active Sub Woofers
Portable and installed PA loudspeaker used in application including sound reinforcement in Houses of Ballrooms etc. The Sub series delivers extraordinary performance at unmatched value. Portable and installed PA loudspeaker used in application including sound reinforcement in Houses of Ballrooms etc. The Sub series delivers extraordinary performance at unmatched value.
DynaTech
Sub-18D Subwoofer
Portable and installed PA loudspeaker used in application including sound reinforcement in Houses of Ballrooms etc. The Sub Series delivers extraordinary performance at unmatched value. Portable and installed PA loudspeaker used in application including sound reinforcement in Houses of Ballrooms etc. The Sub Series delivers extraordinary performance at unmatched value.
DynaTech
T-18A Active Subwoofer
Portable and installed PA loudspeaker used in application including sound reinforcement in Houses of Ballrooms etc. The Typhoon Series T-18A delivers extraordinary performance at unmatched value. Portable and installed PA loudspeaker used in application including sound reinforcement in Houses of Ballrooms etc. The Typhoon Series T-18A delivers extraordinary performance at unmatched value.
DynaTech
Dynatech TC-100
The Dynatech TC-100 is a high output wide range transducer. The TC-100 is an upgraded design that features many of Dynatech's new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce high sound pressure levels at low frequencies but also exhibits an extended high frequency response that makes the TC-100 a full range device. The operating bandwidth of the TC-100 is 70Hz-14000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The TC-100 employs a medium format 1.5 inch (38.5mm) diameter voice coil that provides an AES rated 100 watts of continuous power handling and a full 400 watts of peak rated power handling when sufficient amplifier headroom is available. The TC-100 utilizes Dynatech's under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with Dynatech's precision round wire technology that maximizes system conversion efficiency and cooling. The Suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity. SMALL SIGNAL PARAMETERS Re 6.4Ω Fs 73 Hz Mms 35.72 g/1.23 oz Mmd 68.35 g/2.41 oz Qms 3.31 Qes 0.60 Qts 0.50 Vas 48.12 lt/1.69 ft3 BI 13.28 Tm Cms 8.9e-05 m/N Rms 4.37 Ns/m Le (at 1kHz) 0.56 mH The Dynatech TC-100 is a high output wide range transducer. The TC-100 is an upgraded design that features many of Dynatech's new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce high sound pressure levels at low frequencies but also exhibits an extended high frequency response that makes the TC-100 a full range device. The operating bandwidth of the TC-100 is 70Hz-14000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The TC-100 employs a medium format 1.5 inch (38.5mm) diameter voice coil that provides an AES rated 100 watts of continuous power handling and a full 400 watts of peak rated power handling when sufficient amplifier headroom is available. The TC-100 utilizes Dynatech's under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with Dynatech's precision round wire technology that maximizes system conversion efficiency and cooling. The Suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
DynaTech
UFX12 Analogue Mixer
UFX12 is a professional compact mixer to give you great quality and better reliability than ever before. You will get smooth, accurate more natural and open sound from this apparatus. It is ideal for gigs, recording and fixed PA installations. The UFX12 Mixing Console is packed with features that cannot be found in other consoles of its size: 4 mono (provided with ultra low noise microphone pre amplifiers and Phantom Power at +48 Volt ) and 4 stereo input channels and each of them is provided with a 3-band equalizer for HI, MID and LOW controls, as well as 2 auxiliary control; highly accurate 12- segment bar graph meters and 2-track inputs assignable to main mix, control room/phones Outputs. UFX12 is a professional compact mixer to give you great quality and better reliability than ever before. You will get smooth, accurate more natural and open sound from this apparatus It is ideal for gigs, recording and fixed PA installations. The UFX12 Mixing Console is packed with features that cannot be found in other consoles of its size: 4 mono (provided with ultra low noise microphone pre amplifiers and Phantom Power at +48 Volt ) and 4 stereo input channels and each of them is provided with a 3-band equalizer for HI, MID and LOW controls, as well as 2 auxiliary control; highly accurate 12- segment bar graph meters and 2-track inputs assignable to main mix, control room/phones Outputs.
DynaTech
UFX16 Analogue Mixer
UFX16 is a professional compact mixer to give you great quality and better reliability than ever before. You will get smooth, accurate more natural and open sound from this apparatus. It is ideal for gigs, recording and fixed PA installations. The UFX12 Mixing Console is packed with features that cannot be found in other consoles of its size: 8/16 mono (provided with ultra low noise microphone pre amplifiers and Phantom Power at +48 Volt ) and 4 stereo input channels, 3-band EQ with sweepable MID on mono inputs;4-band EQ on stereo inputs, 4 auxiliary control, highly accurate 12-segment bar graph meters and 2-track inputs assignable to main mix, control room/phone output. UFX16 is a professional compact mixer to give you great quality and better reliability than ever before. You will get smooth, accurate more natural and open sound from this apparatus. It is ideal for gigs, recording and fixed PA installations. The UFX12 Mixing Console is packed with features that cannot be found in other consoles of its size: 8/16 mono (provided with ultra low noise microphone pre amplifiers and Phantom Power at +48 Volt ) and 4 stereo input channels, 3-band EQ with sweepable MID on mono inputs;4-band EQ on stereo inputs, 4 auxiliary control, highly accurate 12-segment bar graph meters and 2-track inputs assignable to main mix, control room/phone output
DynaTech
UFX24 Analogue Mixer
UFX24 is a professional compact mixer to give you great quality and better reliability than ever before. You will get smooth, accurate more natural and open sound from this apparatus. It is ideal for gigs, recording and fixed PA installations. The UFX12 Mixing Console is packed with features that cannot be found in other consoles of its size: 8/16 mono (provided with ultra low noise microphone pre amplifiers and Phantom Power at +48 Volt ) and 4 stereo input channels, 3-band EQ with sweepable MID on mono inputs;4-band EQ on stereo inputs, 4 auxiliary control, highly accurate 12-segment bar graph meters and 2-track inputs assignable to main mix, control room/phone output. UFX24 is a professional compact mixer to give you great quality and better reliability than ever before. You will get smooth, accurate more natural and open sound from this apparatus. It is ideal for gigs, recording and fixed PA installations. The UFX12 Mixing Console is packed with features that cannot be found in other consoles of its size: 8/16 mono (provided with ultra low noise microphone pre amplifiers and Phantom Power at +48 Volt ) and 4 stereo input channels, 3-band EQ with sweepable MID on mono inputs;4-band EQ on stereo inputs, 4 auxiliary control, highly accurate 12-segment bar graph meters and 2-track inputs assignable to main mix, control room/phone output
DynaTech
Dynatech Y-15 Two-Way Monitor afsa
Portable and installed PA loudspeakers used in applications including sound reinforcement in Houses of Worship, Events, Clubs, Rehearsal Halls and Ballrooms etc. The Y-15 deliver extraordinary performance at unmatched value. Portable and installed PA loudspeakers used in applications including sound reinforcement in Houses of Worship, Events, Clubs, Rehearsal Halls and Ballrooms etc. The Y-15 deliver extraordinary performance at unmatched value.
DynaTech
Zeta12T Subwoofer
The Zeta12T is a self-powered subwoofer with an in-built two channel Class-D power amplifier delivering 2 x 500W at 4 Ohms. The Zeta12T is a self-powered subwoofer with an in-built two channel Class-D power amplifier delivering 2 x 500W at 4 Ohms.
