• Home
  • Brands
  • P.Audio

Pro15-400


The P Audio Pro15-400 is a high output low frequency transducer. The Pro15-400 is an upgraded design that features many of P.Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating bandwidth of the Pro-400 is 30Hz to 2500Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.

The Pro15-400 employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 400 watts of continuous power handling and a full 1600 watts of peak rated power handling when sufficient amplifier headroom is available.

The voice coil design is a bobbin would geometry with P.Audio’s precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a die-cast design that insures a very high degree of structural integrity.

GENERAL SPECIFICATIONS

  Nominal diameter   381 mm/15 in
  Power rating   400 W(AES)
  Nominal impedance   8Ω
  Sensitivity   98 dB
  Frequency range   30-2500 Hz
  Chassis type   Cast aluminum
  Magnet type   Ferrite
  Magnet weight   81.4 oz
  Voice coil diameter   76.2 mm/3 in
  Coil material   SV-R
  Cone material   Paper
  Surround material   Cloth
  X-max   3.5 mm
  Gap depth   10 mm
  Packing dimension WxDxH (mm)   415 x 415 x 210
  Net weight   8 kg / 17.6 lb
  Shipping weight   9.4 kg / 20.7 lb

SMALL SIGNAL PARAMETERS

  Re   5.7Ω
  Fs   41 Hz
  Mms   91.37 g
  Mmd   76.32 g
  Qms   7.14
  Qes   0.28
  Qts   0.27
  Vas   180.49 lt
  SD   881.41 cm2
  BI   21.93 Tm
  Cms   1.7e-04 m/N
  Rms   3.3 Ns/m
  Le (at 1kHz)   0.967 mH

Pro15-400


The P Audio Pro15-400 is a high output low frequency transducer. The Pro15-400 is an upgraded design that features many of P.Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating bandwidth of the Pro-400 is 30Hz to 2500Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.

The Pro15-400 employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 400 watts of continuous power handling and a full 1600 watts of peak rated power handling when sufficient amplifier headroom is available.

The voice coil design is a bobbin would geometry with P.Audio’s precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a die-cast design that insures a very high degree of structural integrity.