• Home
  • Brands
  • P.Audio

PH-305


The P Audio PH-305 is a wide bandwidth high frequency horn. The PH-305 is flare rate optimized for additional mid band acoustic loading. The square mouth allows a “rotatable” directivity configuration. The PH-305 may be rotated between a nominal 60 degree horizontal and 40 degree vertical pattern to a nominal 40 degree horizontal by 60 degree vertical coverage pattern. The flat front design allows the PH-305 to be used in modern professional sound reinforcement systems where a flat front system geometry is specified. The nominal included angles of 60 degrees and 40 degrees make the PH-305 a very high performance medium to long throw high frequency wave guide. This makes the horn ideal for high Q coverage requirements.

The PH-305 features a 1.4 inch (35.5mm) diameter throat and is compatible with many of P Audio’s PreNeo and BM-D series high performance compression drivers. The 1.4 inch throat geometry is an industry standard and this makes the horn compatible with many other compression drivers as well. This throat geometry also provides for controlled beamwidth at higher frequencies as well. The medium format mouth area and optimized flare rate provides excellent acoustic loading to below 1000Hz, making the PH-305 ideal for wide range and low frequency crossover points.

The PH-305 construction is a rugged glass filled ABS and is fully braced to provide excellent structural support to the mated compression driver. The horn mouth dimensions of 12 inches (304mm) by 12 inches make the horn an ideal mate for both 12 inch low frequency woofers as well as 15 in woofers. The PH-305 is an ideal choice for professional level two way system designs when additional acoustic loading is required near the compression driver cutoff freuqency.

The PH-305 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver)
- BM-D740
- PreNeo-740N

GENERAL SPECIFICATIONS

  Nominal Coverage Angle ( H° X V°) - 6 dB   60° x 40°
  Cut Off Frequency ( Hz.)   400 Hz
  Throat Diameter   35.5 mm. (1.4")
  Mounting Type   BOLT ON
  Construction   Injected Polymer A.B.S.with glass fiber filled Black Polycabonate
  MOUNTING DIMENSIONS:
  Rear Height   262mm (10.3")
  Rear Width   263mm (10.3")
  OVERALL DIMENSIONS:
  Mount Heigh   304mm (12.0")
  Mount Width   304mm (12.0")
  Length   217mm (8.5")
  BAFFLE CUTOUT DIMENSIONS:
  Height   265mm (10.4")
  Width   265mm (10.4")
  Net Weight   1.20kg (2.64 lbs)
  Shipping Weight   1.70kg (3.74 lbs)
  Packing Dimension   328mm x 328mm x 240mm
  12.9" x 12.9" x 9.4"

PH-305


The P Audio PH-305 is a wide bandwidth high frequency horn. The PH-305 is flare rate optimized for additional mid band acoustic loading. The square mouth allows a “rotatable” directivity configuration. The PH-305 may be rotated between a nominal 60 degree horizontal and 40 degree vertical pattern to a nominal 40 degree horizontal by 60 degree vertical coverage pattern. The flat front design allows the PH-305 to be used in modern professional sound reinforcement systems where a flat front system geometry is specified. The nominal included angles of 60 degrees and 40 degrees make the PH-305 a very high performance medium to long throw high frequency wave guide. This makes the horn ideal for high Q coverage requirements.

The PH-305 features a 1.4 inch (35.5mm) diameter throat and is compatible with many of P Audio’s PreNeo and BM-D series high performance compression drivers. The 1.4 inch throat geometry is an industry standard and this makes the horn compatible with many other compression drivers as well. This throat geometry also provides for controlled beamwidth at higher frequencies as well. The medium format mouth area and optimized flare rate provides excellent acoustic loading to below 1000Hz, making the PH-305 ideal for wide range and low frequency crossover points.

The PH-305 construction is a rugged glass filled ABS and is fully braced to provide excellent structural support to the mated compression driver. The horn mouth dimensions of 12 inches (304mm) by 12 inches make the horn an ideal mate for both 12 inch low frequency woofers as well as 15 in woofers. The PH-305 is an ideal choice for professional level two way system designs when additional acoustic loading is required near the compression driver cutoff freuqency.

The PH-305 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver)
- BM-D740
- PreNeo-740N