• Home
  • Brands
  • P.Audio

EM15-LB600


The P Audio EM15-LB600 is a high performance 15 inch (381mm) diameter low frequency/full range transducer. The EM15-LB600 features a very large diameter silicone impregnated spider that substantially reduces component stress and improves both linearity and long term reliability. The large diameter suspension elements combine with the unique 3.5” (88.9mm) voice coil diameter and extended winding length to produce high Xmax performance and very tight low frequency sonic character. The EM15-LB600 is an excellent choice for full range two way designs. The EM15-LB600 features 2400 watt peak power handling (600 watts continuous) and extended bandwidth frequency response. The unique 3.5 inch voice coil diameter provides an excellent balance between high power handling and controlled moving mass. The result is a high efficiency design that offers high impact low frequency response and high reliability. The 3.5 inch coil design offers less moving mass than a conventional 4 inch design. The reduced moving mass offers superior transient response as well as extended high frequency response.

The EM15-LB600 offers a 40Hz to 2500Hz useable bandwidth. The performance of the EM15-LB600 is optimized when using a high pass 4th order Butterworth filter tuned to near the enclosure vent frequency. Although the woofer is rated to 2500Hz, typical high frequency crossover points will be based on the compression driver and horn combination used for the high frequency section.

GENERAL SPECIFICATIONS

  Nominal diameter   381 mm / 15 in
  Peak Power   2400 W
  AES Power   600 W
  Nominal impedance   8Ω
  Sensitivity (1W/1m)   95 dB
  Frequency range   40 - 2500 Hz
  Chassis type   Heavy Duty Stamped Steel
  Magnet type   Ferrite
  Magnet weight   2.95 kg / 103.9 oz
  Voice coil diameter   88.9 mm / 3.5 in
  Coil material   Copper Clad Aluminium
  Former material   Glass fiber
  Cone material   Paper
  Surround material   Cloth
  Suspension   Single
  Xmax   4 mm / 0.16 in
  Gap depth   10 mm / 0.39 in
  Voice coil
 winding width
  18 mm / 0.71 in
  Unit weight   9.6 kg / 21.2 lb
  Shipping weight   10.6 kg / 23.4 lb
  Packaging dimension WxDxH   415x415x220 mm    16.3x16.3x8.7 in

FEATURES

  • 3.5” Voice Coil
  • 2400 Watts Peak Power Handling
  • 95 dB Sensitivity
  • Ferrite Magnetics
  • Precision Round Wire Inside/Outside Coil Design
  • Stamped Steel Chassis

SMALL SIGNAL PARAMETERS

  Fs   52 Hz
  Re   5.5 Ohm
  Qms   8.05
  Qes   0.56
  Qts   0.52
  Bl   17.76 Tm
  Mms   98.12 g / 3.5 oz
  Mmd   83.07 g / 2.9 oz
  Vas   102.37 lt / 3.6 cu.ft3
  Sd   881 cm2
  Le   0.60 mH
  Cms   9.4e - 05 m/N
  Rms   4.04 Ns/m

EM15-LB600


The P Audio EM15-LB600 is a high performance 15 inch (381mm) diameter low frequency/full range transducer. The EM15-LB600 features a very large diameter silicone impregnated spider that substantially reduces component stress and improves both linearity and long term reliability. The large diameter suspension elements combine with the unique 3.5” (88.9mm) voice coil diameter and extended winding length to produce high Xmax performance and very tight low frequency sonic character. The EM15-LB600 is an excellent choice for full range two way designs. The EM15-LB600 features 2400 watt peak power handling (600 watts continuous) and extended bandwidth frequency response. The unique 3.5 inch voice coil diameter provides an excellent balance between high power handling and controlled moving mass. The result is a high efficiency design that offers high impact low frequency response and high reliability. The 3.5 inch coil design offers less moving mass than a conventional 4 inch design. The reduced moving mass offers superior transient response as well as extended high frequency response.

The EM15-LB600 offers a 40Hz to 2500Hz useable bandwidth. The performance of the EM15-LB600 is optimized when using a high pass 4th order Butterworth filter tuned to near the enclosure vent frequency. Although the woofer is rated to 2500Hz, typical high frequency crossover points will be based on the compression driver and horn combination used for the high frequency section.