• Home
  • Brands
  • P.Audio

EM15-LB300


The P Audio EM15-LB300 is a high performance 15 inch (381mm) diameter low frequency/full range transducer. The EM15-LB300 features a very large diameter spider that substantially reduces component stress and improves both linearity and long term reliability. The large diameter suspension elements combine with the 3 inch (76mm) voice coil diameter and extended winding length to produce controlled Xmax performance and very tight full range sonic character. The EM15-LB300 is an excellent choice for full range two way designs. The EM15-LB300 features 1200 watt peak power handling (300 watts continuous) and extended bandwidth frequency response. The 3 inch voice coil diameter provides excellent power handling and controlled moving mass. The result is a high efficiency design that offers high impact response and high reliability. The 3 inch coil design offers less moving mass than larger voice coil designs. The reduced moving mass offers superior transient response as well as extended high frequency bandwidth.

The EM15-LB300 offers a 40Hz to 2000Hz useable bandwidth. The performance of the EM15-LB300 is optimized when using a high pass 4th order Butterworth filter tuned to near the enclosure vent frequency. Although the woofer is rated to 2000Hz, typical high frequency crossover points will be based on the compression driver and horn combination used for the high frequency section.

GENERAL SPECIFICATIONS

  Nominal diameter   381 mm / 15 in
  Peak Power   1200 W
  AES Power   300 W
  Nominal impedance   8Ω
  Sensitivity (1W/1m)   96 dB
  Frequency range   40 - 2000 Hz
  Chassis type   Heavy Duty Stamped Steel
  Magnet type   Ferrite
  Magnet weight   2.31 kg / 81.4 oz
  Voice coil diameter   76.2 mm / 3 in
  Coil material   Copper Clad Aluminium
  Former material   Glass fiber
  Cone material   Paper
  Surround material   Cloth
  Suspension   Single
  Xmax   3.4 mm / 0.13 in
  Gap depth   10 mm / 0.39 in
  Voice coil
 winding width
  16.8 mm / 0.66 in
  Unit weight   8.2 kg / 18.1 lb
  Shipping weight   9.2 kg / 20.3 lb
  Packaging dimension
  WxDxH
  415x415x220 mm   
 16.3x16.3x8.7 in

FEATURES

  • 3” Voice Coil
  • 1200 Watts Peak Power Handling
  • 96 dB Sensitivity
  • Ferrite Magnetics
  • 2 Layer Round Wire Coil Design
  • Stamped Steel Chassis

SMALL SIGNAL PARAMETERS

  Fs   49 Hz
  Re   5.5 Ohm
  Qms   9.07
  Qes   0.53
  Qts   0.50
  Bl   16.68 Tm
  Mms   85.84 g / 3.03 oz
  Mmd   71.46 g / 2.52 oz
  Vas   122.88 lt / 4.34 cu.ft3
  Sd   855 cm2
  Le   0.52 mH
  Cms   1.2e - 04 m/N
  Rms   2.97 Ns/m

EM15-LB300


The P Audio EM15-LB300 is a high performance 15 inch (381mm) diameter low frequency/full range transducer. The EM15-LB300 features a very large diameter spider that substantially reduces component stress and improves both linearity and long term reliability. The large diameter suspension elements combine with the 3 inch (76mm) voice coil diameter and extended winding length to produce controlled Xmax performance and very tight full range sonic character. The EM15-LB300 is an excellent choice for full range two way designs. The EM15-LB300 features 1200 watt peak power handling (300 watts continuous) and extended bandwidth frequency response. The 3 inch voice coil diameter provides excellent power handling and controlled moving mass. The result is a high efficiency design that offers high impact response and high reliability. The 3 inch coil design offers less moving mass than larger voice coil designs. The reduced moving mass offers superior transient response as well as extended high frequency bandwidth.

The EM15-LB300 offers a 40Hz to 2000Hz useable bandwidth. The performance of the EM15-LB300 is optimized when using a high pass 4th order Butterworth filter tuned to near the enclosure vent frequency. Although the woofer is rated to 2000Hz, typical high frequency crossover points will be based on the compression driver and horn combination used for the high frequency section.